With both the Airthings Wave plus and the Airthings tiny in the new Automated Home, we love the ability to keep an eye on our air quality.
As they are Bluetooth devices rather than WiFi they have a long battery life, however this also indicates that you have to be within a few metres of them to get a reading.
Inntil nå.
Airthings Hub
The new Airthings Ethernet Hub (Model 2810) is a 12 cm square that acts as a gateway between the battery powered Airthings sensors and your network.
The Hub does not use Bluetooth, instead it bridges your LAN by means of its Ethernet port to Airthings own ‘SmartLink’ wireless system which operates on 868 / 915 Mhz. This gives it a much better range than Bluetooth and Airthings say it ‘covers a lot of residential homes’ with a range of ‘up to 100m’.
Setup
The hub can sit on a flat surface or on a wall with the included bracket which in a great touch has a little spirit level developed into it
Just plug it into your router or switch with the Ethernet cord and connect it up to the mains power adaptor (both included in the box). We’ve mounted ours in the data rack in the garage and the signal strength to the sensors in the barn and our bedroom are great.
Device Support
The Hub supports the Wave Plus, the Wave tiny and the Wave 2nd Gen sensors and you can connect up to 10 devices at once. If you have a lot more than 10 devices then Airthings tell us you can use multiple hubs too.
While the Hub does have Bluetooth on-board this is only used for the initial configuration process with the app. once you connect your sensors to a hub their Bluetooth is disabled and you are no longer able to access readings directly from them.
Fjerntilgang
With the hub added to your Airthings setup, you have remote access to all your sensors and data.
I used to have a daily tip on my phone to terminate up the app and sync our readings which wasn’t really ideal. now everything just happens immediately and I can check our current and historic air quality from anywhere at any time from dashboard.airthings.com.
The hub polls the sensors every 5 minutes for VOC / temperature / Humidity / CO2 and Air pressure readings and once an hour for radon.
Airthings say that battery life on the Wave plus using this smartlink configuration is up to 18 months, versus around 16 months on BLE.
New Mould Feature
It’s great to see the Airthings system continue to develop with products like the Hub. There’s also a brand new Mould risk indication feature that has just been added to the Wave tiny too.
Summing Up
The Hub was the missing link that has pulled our Airthings system together and put everything online automatically. This gives the best of both worlds – the network connectivity of a WiFi device, with battery life that’s even better than a BLE sensor.
Tilgjengelig fra Amazon.
Salg
113 Reviews
Airthings Hub, 24/7 access to your Airthings monitor data,2810
online DATA: The Airthings Hub brings your radon and air quality screens online in any way times through an Ethernet and power cable
24/7 access to your air quality data with the addition of the Airthngs Hub
REMOTE ACCESS: The Hub connects your Airthings Wave Plus, Wave 2nd gen, Wave tiny to the cloud, enabling remote access to your data.
£59.50
Kom på Amazon.
airthings.com
Dele denne:
Facebook.
Twitter.
Reddit.
LinkedIn.
Pinterest4
E-post
Mer
Hva skjer
Skrive ut
Skype.
Tumblr.
Telegram
Lomme
Last update on 2021-10-04 / affiliate links / images from Amazon product advertising API
Leave a Reply